Skip to main content

1st Spray Print


The screen frame is put together with a staple gun. Recall: paint sticks and window screen are materials. Cut stencil using xacto knife on print in screen protector push pinned to cork board with manila folder as protection. Plastic stencil was placed without adhesive in screen. Acrylic paint (what Jess used for Sadie's mural; from Home Depot-$3.50) was dilute with water and put in insect repellent spritz bottle (dilution was few drips of paint to ~20 mL h2o). Old t-shirt sprayed and baked at 400. What's pictured here survived a wash. *Note: don't bake for more than 1 min. Charred shirt and emitted what was likely toxic fumes into the house.

Comments

Post a Comment

Popular posts from this blog

Learning to be a TN Amateur Naturalist

#1 Google hit for "TN amateur naturalist" http://tnnaturalist.org/ Memphis Chapter, has good contacts from the biggest Naturalist institutions in Memphis. http://tnnaturalist.org/4-Memphis.html Promo of program from TN State Parks https://tnstateparks.com/get-involved/tennessee-naturalist-program The books I got from Memphis Library (Ben Hooks), the 500 section (574) on the 3rd floor. It will be good to reach out to some of the Memphis Chapter folks and see what I get back. Have to think through what "reaching out" means.
1 comment
Read more

Plastic Origami Field Use Microtome

Plastic origami (plastic folder source) worked well to make specimen holder. 2 widths possible by either folding down on bottom to furthest stop or by placing bottom together in slit cut. Slide holder is filled with water and specimen is hand advanced with the slightest of nudges over the length of the specimen holder. Cuts are made on the other side of the glass slide, which holds the specimen holder in place and also acts to create a smooth cutting surface for better quality cut (using standard razor blade). The glass slide has a semi-ovular cut from the bottom using a steel wheel glass cutter (see video). This cut allows the specimen to advance beyond the glass so that the specimen can be cut. Cross sectional cuts of stem are picked up with needle nose forceps and placed on a slide. Extra water was absorbed with Kim wipes separating slides. Clear tape is used as cover slip to secure specimen to slide and then specimen are examined using Carson handheld microscope. ...
Post a Comment
Read more