Skip to main content

In Search of a Field Microscope Slide Fix


The tape on slide may actually be the best for the field. Not sure how to transfer specimen for long haul, if even possible. Sheet protector tried for cheap slide potential, but opacity and particular construction obscures. Crazy glue dries really clear and fast, but is messy (fingerprints). May be some potential with using nail polish with no slide cover. Dried really pretty on sheet protector (clear; but still have to check for bubbles). Dilute Elmer's still too milky, but specimen is preserved nicely. Also, must consider having a field "table" to work on. Everything must be placed "just so" to facilitate the work. Debris and fingerprints must be avoided but difficult. Must increase skill with forceps.
Happy to discover that the Carson field scope can work with rubber band secured to slide. That will come in handy.

Comments

Post a Comment

Popular posts from this blog

Learning to be a TN Amateur Naturalist

#1 Google hit for "TN amateur naturalist" http://tnnaturalist.org/ Memphis Chapter, has good contacts from the biggest Naturalist institutions in Memphis. http://tnnaturalist.org/4-Memphis.html Promo of program from TN State Parks https://tnstateparks.com/get-involved/tennessee-naturalist-program The books I got from Memphis Library (Ben Hooks), the 500 section (574) on the 3rd floor. It will be good to reach out to some of the Memphis Chapter folks and see what I get back. Have to think through what "reaching out" means.
1 comment
Read more

Plastic Origami Field Use Microtome

Plastic origami (plastic folder source) worked well to make specimen holder. 2 widths possible by either folding down on bottom to furthest stop or by placing bottom together in slit cut. Slide holder is filled with water and specimen is hand advanced with the slightest of nudges over the length of the specimen holder. Cuts are made on the other side of the glass slide, which holds the specimen holder in place and also acts to create a smooth cutting surface for better quality cut (using standard razor blade). The glass slide has a semi-ovular cut from the bottom using a steel wheel glass cutter (see video). This cut allows the specimen to advance beyond the glass so that the specimen can be cut. Cross sectional cuts of stem are picked up with needle nose forceps and placed on a slide. Extra water was absorbed with Kim wipes separating slides. Clear tape is used as cover slip to secure specimen to slide and then specimen are examined using Carson handheld microscope. ...
Post a Comment
Read more