Skip to main content

My First Plant Press

My first plant press. Went on an expedition hike and collected a few samples from the Old Forest @ Overton Park. This press will help to preserve those samples. I hope to frame the pressed plants as decor, possibly saleable someday. For now, solely for display of identified species. 1/4"x4" 20 bolts with washers and wing nuts. 1-1/8" holes separated 4" in every direction. Board is about 24"x16", cut from a $6 24"x48" plywood board. Makes the whole project less than $10 with a 24"x16x board to spare.

Comments

Post a Comment

Popular posts from this blog

Modules on Virtual Memory | Making the Most of Ancestral Intelligence

This project was conceived to better understand the future of the internet, given Generative AI and the burgeoning population. This ultimately has to do with the increasingly abundant amount of information, and our increasing collective ability to remember a lot of what has happened, and recollect what has happened; all of us, Generative AI included. I would like that we amended our current semantics to Generative Ancestral Intelligence , as I think that this gives a clearer idea for the matter of discussion. Below find the modules for this iterative journey through the expanse of The Mind.  The Mind - A Human Faculty What is the mind and what can it do - planetarium What can the mind be trained to do and how do we approach the education of the mind - library and/or university Literacy & Symbolism Language Math Science Social Studies Web Literacy Integration and Creative Thinking The Internet - The Virtual Mind - The Computer Lab What are Data Storage and Documentation? A word ...
Post a Comment
Read more

Plastic Origami Field Use Microtome

Plastic origami (plastic folder source) worked well to make specimen holder. 2 widths possible by either folding down on bottom to furthest stop or by placing bottom together in slit cut. Slide holder is filled with water and specimen is hand advanced with the slightest of nudges over the length of the specimen holder. Cuts are made on the other side of the glass slide, which holds the specimen holder in place and also acts to create a smooth cutting surface for better quality cut (using standard razor blade). The glass slide has a semi-ovular cut from the bottom using a steel wheel glass cutter (see video). This cut allows the specimen to advance beyond the glass so that the specimen can be cut. Cross sectional cuts of stem are picked up with needle nose forceps and placed on a slide. Extra water was absorbed with Kim wipes separating slides. Clear tape is used as cover slip to secure specimen to slide and then specimen are examined using Carson handheld microscope. ...
Post a Comment
Read more