Skip to main content

Here presented are the samples pressed on Oct 13 from an earlier Overton Park Old Forest trip. 11x14 (maple and fern) and 4x6 (misc) frames obtained from Dollar Tree shown here. Gloss coated frame insert is turned over to the white background (so no special cut was necessary). Careful examination detects the image on the other side of what's seen here as a white backing.

These initial plant press framings are not the most beautiful, but I am proud of them. They represent an edging forward for me from indecision, procrastination, and perfectionism to iteration, process, and reflective assessment.

I have to figure out what kinds of plants I want to put together, what else I might want to put with the plant and what will be my process of permanence (spray adhesive, backing material, labeling).

Comments

Post a Comment

Popular posts from this blog

Learning to be a TN Amateur Naturalist

#1 Google hit for "TN amateur naturalist" http://tnnaturalist.org/ Memphis Chapter, has good contacts from the biggest Naturalist institutions in Memphis. http://tnnaturalist.org/4-Memphis.html Promo of program from TN State Parks https://tnstateparks.com/get-involved/tennessee-naturalist-program The books I got from Memphis Library (Ben Hooks), the 500 section (574) on the 3rd floor. It will be good to reach out to some of the Memphis Chapter folks and see what I get back. Have to think through what "reaching out" means.
1 comment
Read more

Plastic Origami Field Use Microtome

Plastic origami (plastic folder source) worked well to make specimen holder. 2 widths possible by either folding down on bottom to furthest stop or by placing bottom together in slit cut. Slide holder is filled with water and specimen is hand advanced with the slightest of nudges over the length of the specimen holder. Cuts are made on the other side of the glass slide, which holds the specimen holder in place and also acts to create a smooth cutting surface for better quality cut (using standard razor blade). The glass slide has a semi-ovular cut from the bottom using a steel wheel glass cutter (see video). This cut allows the specimen to advance beyond the glass so that the specimen can be cut. Cross sectional cuts of stem are picked up with needle nose forceps and placed on a slide. Extra water was absorbed with Kim wipes separating slides. Clear tape is used as cover slip to secure specimen to slide and then specimen are examined using Carson handheld microscope. ...
Post a Comment
Read more