Coming up with a bungee system to secure the kayak to the 2 wheeler is proving more difficult than at first glance. The key is having the right "forward" and "rear" tension so that the kayak is not pulled too forward. That it can stand upright however is some indication of being "good enough". Also noteworthy, a piece of 6 ft 1/2 in PVC fits in the screw together oars which I put together as kayak paddles. Now I don't have to unscrew the handle of the broom I've been using.
Here's the kayak bike tow system put together. Dumbstick + Amp 2 Wheeler. Works.
This is a "dumb stick" used to attach a kayak to a bike. Easy construction from PVC; the tricky thing is making sure the hole for the seat stem is cut at an angle so that it's somewhat perpendicular to the seat. The bolt is to prevent the pull cord from coming off the end. And I cut a piece of wire hanger and bent to act as an additional catch so that all of the tension of the pull cord is not on one spot (which would lead to early failure of the tow system).
My Buddy
Early Stage... repurposed doll umbrella stroller




Comments
Post a Comment